Powerturn

Powerturn IS/TS 2-leaf swing door drive system Semi-automatic system with swing door drive on active leaf and door closer on passive leaf

Smart swing function for easy manual door opening
Closing force of EN4-7 with variable adjustment
Opening and closing speed can be adapted individually on the active leaf
Mechanical latching action which accelerates the door shortly before the closed position
Mechanical closing sequence control holds the active leaf in the waiting position until the passive leaf is closed
Low-energy function opens the door with reduced speed, fulfilling the highest safety requirements

Obstacle detection detects an object through contact and stops the opening or closing process
Automatic reversing detects an obstacle and returns to the opening or closing position
Push & Go function triggers the automatic drive components following manual door handle activation
System available for use with roller guide rail or link arm
Optional radio reception board for wireless activation by radio transmitter
Hold-open function can be activated by manually pulling the door leaf closed
Reset of the hold-open system by manually opening the door leaf to an opening angle of 80° or changing the mode of operation

Right and left double leaf single-action doors
Single-action doors up to 3200 mm hinge clearance with link arm installation
Single-action doors up to 3000 mm hinge clearance with roller guide rail installation
Minimum hinge clearance 1270 mm, minimum passive leaf width 470 mm (depending on installation type)
Interior and exterior doors with high access frequency
Symmetrical and asymmetrical division of door possible
Transom installation hinge and opposite hinge side

Opera House Dubai, Powerturn © Nicolas Thome / GEZE GmbH

Technical data

	Powerturn IS/TS 2-leaf swing door drive system
Height	70 mm
Depth	130 mm
Length min.	1270 mm
Length max.	3200 mm
Leaf weight (max.) 1-leaf	600 kg
Distance centre door hinge-drive axis (min.-max.) 2-leaf, link arm	1270 mm - 3200 mm
Distance centre door hinge-drive axis (min.-max.) 2-leaf, roller guide rail	1380 mm - 3000 mm
Leaf width (min.-max.)	470 mm - 1600 mm
Reveal depth (max.)	160 mm
Drive type	Electromechanical
Opening angle (max.)	136 °
Spring pre-load	EN1 - EN7
DIN left	Yes
DIN right	Yes
Transom installation opposite hinge side with link arm	Yes
Transom installation hinge side with roller guide rail	Yes
Mechanical latching action	Yes
Electrical latching action	Yes
Electrical closing sequence control	Yes
Mechanical closing sequence control	Yes
Disconnection from mains	Main switch in the drive
Activation delay (max.)	10 s
Operating voltage	230 V
Power rating	200 W
Power supply for external consumers (24 V DC)	1200 mA
Service temperature	-15 - 50 °C
IP rating	IP30
Mode of operation	Automatic, Night, Permanently open, Shop closing, Off
Type of function	Fully automatic
Automatic function	Yes
Low-energy function	Yes
function smart swing	Yes
Servo function	Yes
Key function	Yes
Obstacle detection	Yes
Automatic reversing	Yes
Push & Go	adjustable
Operation	GEZEconnects (PC + Bluetooth), Service terminal ST 220, Programme switch DPS
Parameter setting	GEZEconnects (PC + Bluetooth), Service terminal ST 220
Standard conformity	EN 1158, DIN EN 16005
Smoke switch integrated	Yes