00 81L PI000000090 000001 01 27.09.21 000002 02 000003 03... 000004 08EUR Euro 000005 2110 NNN 00000000000Stk 000006 25GEZE Slimdrive SCR 000007 25(compact automatic circular sliding door) 000008 26 000009 26 GEZE Slimdrive SCR, modular, compact automatic round 000010 26 arch sliding door (360ø) with a drive height of only 000011 26 70 mm, TšV type-tested in accordance with DIN 18650 / 000012 26 EN 16005, fine-framed in light-coloured transparent 000013 26 design, unusually spacious, with a freely selectable 000014 26 diameter between 2000 mm and 4000 mm. 000015 26 000016 26 Integrated rechargeable battery for emergency opening 000017 26 and closing in the event of a power failure 000018 26 Latest software for optional Bluetooth connection to 000019 26 a PC for convenient parameter setting, commissioning 000020 26 and after-sales service maintenance 000021 26 Intelligent digital control performance level "d" 000022 26 according to DIN EN ISO 13849-1): 000023 26 - Self-learning 000024 26 - Optimum convenience thanks to automatic adaptation 000025 26 of door behaviour to traffic 000026 26 - Can be networked and integrated in building systems 000027 26 via CAN-bus 000028 26 - Independent fault detection and protocol 000029 26 - Adjustment options for all door movement parameters 000030 26 - All functions integrated in one unit, no further 000031 26 modules necessary 000032 26 - Cover in Slimdrive design, 70 mm height 000033 26 - Stainless steel floor guide embedded in the floor 000034 26 000035 26 Two extremely quiet running direct current drives, 000036 26 for leaf weights up to 120 kg 000037 26 Robust power supply with integrated all-pole main 000038 26 switch and fuse protection 000039 26 Static and dynamic power limitation according to 000040 26 DIN 18650 / EN 16005, as well as static under 150 N 000041 26 in accordance with ASR A1.7 (formerly BGR 232) 000042 26 Automatic reversal when obstacles are detected 000043 26 000044 26 Construction dimensions (dimensions in unfinished 000045 26 state): 000046 26 Inside diameter: .............mm, 000047 26 freely selectable between 2000 and 4000 mm, 000048 26 Outside diameter: .............mm 000049 26 Clear passage height PH: .............mm 000050 26 Total height of door system: .............mm 000051 26 Passage clearance PC: .............mm 000052 26 000053 26 Note: Other dimensions on request! 000054 26 000055 26 Fine-framed drum walls made of GEZE profile systems 000056 26 for mounting: 000057 26 ( ) Curved VSG 10 mm, clear 000058 26 000059 26 or 000060 26 ( ) Curved thermally insulated panel lining, 22 mm 000061 26 thick 000062 26 000063 26 or 000064 26 ( ) Smooth-surface thermally insulated panels, 000065 26 approx. 34 mm thick 000066 26 000067 26 Moving leaf: 000068 26 ( ) Fine-framed with GEZE profile system VSG 10 mm, 000069 26 clear 000070 26 000071 26 Aluminium ceiling construction: 000072 26 ( ) Standard height 70 mm 000073 26 or 000074 26 ( ) Raised ceiling canopy .............mm, with 000075 26 perimeter canopy cover made of curved aluminium 000076 26 sheets 000077 26 or 000078 26 ( ) Curved fanlight ................mm, made of 000079 26 glass, positioned above the 70 mm ceiling 000080 26 canopy 000081 26 000082 26 Roof covering outside: 000083 26 ( ) Metal cover plate 000084 26 000085 26 or 000086 26 ( ) Waterproof roof with 2 water spouts (flat roof 000087 26 without gradient) 000088 26 000089 26 or 000090 26 ( ) Glass roof with metal cover over the drive unit 000091 26 000092 26 Roof covering inside: 000093 26 ( ) Metal cover plate 000094 26 000095 26 or 000096 26 ( ) Glass roof with metal cover over the drive unit 000097 26 000098 26 Surface of the light alloy parts: 000099 26 ( ) Powder coating RAL colours 000100 26 000101 26 or 000102 26 ( ) LM anodised E6/EV1 000103 26 000104 26 or 000105 26 ( ) Colour anodised ............ 000106 26 000107 26 or 000108 26 ( ) Coated with ground stainless steel, grain 240 000109 26 000110 26 or 000111 26 ( ) Coated with polished stainless steel 000112 26 000113 26 Floor ring 000114 26 ( ) GEZE 360ø stainless steel (V2A) floor ring is 000115 26 used as floor covering edging at the same time. 000116 26 ( ) Sheet metal base 100 mm 000117 26 000118 26 or 000119 26 ( ) Swivel flange (30 x 5 mm) 000120 26 000121 26 and/or 000122 26 ( ) Floor plate with discharge nozzle 000123 26 000124 26 Note: The insulation of the building is a contracted 000125 26 service and must be carried out on site. 000126 26 000127 26 Floor cover 000128 26 ( ) GEZE floor mat, anthracite colour, 22 mm, more 000129 26 colours available on request! 000130 26 or 000131 26 ( ) 18 mm coconut matting in natural colours 000132 26 (delivery only, laying by the technical crew of 000133 26 the floor fitters) 000134 26 or 000135 26 ( ) 4 mm black rubber nap mat 000136 26 (delivery only, laying by the technical crew of 000137 26 the floor fitters) 000138 26 or 000139 26 ( ) Floor cover to be carried out on site 000140 26 000141 26 Wiring to be carried out on site according to the GEZE 000142 26 cable plan by an electrical contractor. 000143 26 000144 26 Installation, commissioning and instruction of the 000145 26 operator as well as documentation handover in 000146 26 compliance with DIN 18650 / EN 16005 through plant 000147 26 fitters or service partner. 000148 26 000149 26 In compliance with DIN 18650 / EN 16005: 000150 26 - Safety analysis must be carried out as a basis for 000151 26 planning and execution 000152 26 - An inspection must be carried out at least 1 x year 000153 26 and after-sales service maintenance at least 1 x 000154 26 year 000155 2111 NNN 00000000000Stk 000156 25Programme switches 000157 26 000158 26 Operation 000159 26 000160 26 GEZE display programme switch in the AS 500 range for 000161 26 setting the mode of operation as well as for 000162 26 commissioning and parameterisation of the drive, with 000163 26 function keys, 2x 7-segment display, alphanumerical 000164 26 fault display, IP rating IP 40 000165 26 Operating modes: permanently open, automatic, shop 000166 26 closing, night-locking, off 000167 26 ( ) Surface-mounted ( ) Flush-mounted 000168 26 000169 26 or 000170 26 GEZE key programme switch for setting the operating 000171 26 mode, with control keys, LED dot display, coded error 000172 26 display, IP rating IP 40, suitable for switch product 000173 26 ranges with 55 x 55 mm switch insert 000174 26 Operating modes: off, permanently open, automatic, 000175 26 shop closing-time, night-locking 000176 26 ( ) Surface-mounted ( ) Flush-mounted 000177 26 000178 26 or 000179 26 GEZE mechanical programme switch for setting the 000180 26 operating mode, with rotary button, LED fault display, 000181 26 IP rating IP 40, suitable for switch programmes with 000182 26 55 x 55 mm switch insert 000183 26 Operating modes: off, permanently open, automatic, 000184 26 shop closing-time, night-locking 000185 26 ( ) Surface-mounted ( ) Flush-mounted 000186 26 000187 26 or 000188 26 GEZE mechanical programme switch for setting the 000189 26 operating mode, with key, LED fault display, IP rating 000190 26 IP 40, suitable for switch programmes with 55 x 55 mm 000191 26 switch insert 000192 26 Operating modes: off, permanently open, automatic, 000193 26 shop closing-time, night-locking 000194 26 ( ) Surface-mounted ( ) Flush-mounted 000195 26 000196 26 000197 26 000198 2112 NNN 00000000000Stk 000199 25Key switch 000200 26 000201 26 Operation (optional position) 000202 26 000203 26 GEZE key switch to "lock" the programme switch to 000204 26 prevent unauthorised changing of the operating mode, 000205 26 IP rating IP 40 000206 26 ( ) Surface-mounted ( ) Flush-mounted 000207 26 000208 2113 NNN 00000000000Stk 000209 25Combined detector 000210 26 000211 26 Activation and protection 000212 26 000213 26 GEZE combined detector with direction-sensing radar 000214 26 movement detector for activation and 3D light curtain 000215 26 for protection of the closing section in accordance 000216 26 with DIN 18650 / EN 16005, protection rating IP 54 000217 26 ( ) Interior combined detector 000218 26 ( ) Exterior combined detector 000219 26 000220 26 Accessories: 000221 26 ( ) Exterior: weather hood to protect the sensor from 000222 26 the interference of rain 000223 26 ( ) Ceiling installation bracket 000224 26 ( ) Ceiling installation kit for integrating the light 000225 26 curtain in the ceiling 000226 26 ( ) Exterior: adapter for curved sliding doors 000227 26 000228 2114 NNN 00000000000Stk 000229 25Active infrared light curtain 000230 26 000231 26 Protection (optional position) 000232 26 000233 26 GEZE active infrared light curtain with double 3D 000234 26 light curtain for protecting the opening or closing 000235 26 section according to DIN 18650/EN 16005, protection 000236 26 rating IP 54 000237 26 ( ) Interior ( ) Exterior 000238 26 000239 26 Accessories: 000240 26 ( ) Exterior: weather hood to protect the sensor from 000241 26 the interference of rain 000242 26 ( ) Ceiling installation bracket 000243 26 ( ) Ceiling installation kit for integrating the light 000244 26 curtain in the ceiling 000245 26 ( ) Exterior: adapter for curved sliding doors 000246 26 000247 2115 NNN 00000000000Stk 000248 25GEZE switches and push buttons 000249 26 000250 26 Activation (optional position) 000251 26 000252 26 GEZE elbow switch, plastic, IP rating IP 30 000253 26 Dimensions: 90 x 180 x 23 mm 000254 26 ( ) white ( ) stainless steel 000255 26 ( ) optional transmitting module 000256 26 ( ) Surface-mounted ( ) Rear panel for attaching the 000257 26 elbow switch to glass (in connection with the 000258 26 transmitting module) 000259 26 000260 26 or 000261 26 GEZE elbow switch, LS990, IP rating IP 30 000262 26 Dimensions: 81 x 223 x 51 mm 000263 26 ( ) white ( ) stainless steel 000264 26 ( ) optional transmitting module 000265 26 ( ) Surface-mounted ( ) Flush-mounted 000266 26 000267 26 or 000268 26 GEZE elbow switch, stainless steel, IP rating IP 65 000269 26 Dimensions: 72 x 250 x 17 mm 000270 26 ( ) Surface-mounted 000271 26 000272 26 or 000273 26 GEZE non-contact proximity switch (radar) 000274 26 Plastic with antimicrobial surface, IP rating IP65, 000275 26 multi-colour LED feedback, adjustable acoustic 000276 26 feedback. Additional input to actively change the LED 000277 26 colour. 000278 26 Dimensions: 80 x 80 mm 000279 26 ( ) Flush mounting 12 mm deep 000280 26 ( ) Surface mounting 21 mm deep 000281 26 ( ) Variant for WC 000282 26 000283 26 or 000284 26 GEZE LED sensor push button, plastic, 000285 26 IP rating IP 69K 000286 26 round, diameter: 100 mm 000287 26 ( ) Flush-mounted 000288 26 ( ) Surface-mounted: mounting ring flat 4 mm 000289 26 ( ) Surface-mounted: mounting ring high 20 mm 000290 26 000291 26 or 000292 26 GEZE LED sensor push button, glass, IP rating IP 69K 000293 26 round, diameter: 100 mm 000294 26 ( ) Flush-mounted 000295 26 ( ) Surface-mounted: mounting ring flat 4 mm 000296 26 ( ) Surface-mounted: mounting ring high 20 mm 000297 26 000298 26 or 000299 26 GEZE LED sensor foot switch, glass, IP rating IP69K 000300 26 Dimensions: 100 x 100 x 3 mm 000301 26 ( ) flush-mounting 000302 26 ( ) vertically adjustable installation base for depths 000303 26 of up to 215 mm from the unfinished floor 000304 26 000305 2116 NNN 00000000000Stk 000306 25Wireless programme 000307 26 000308 26 GEZE wireless programme with secure rolling code 000309 26 encryption for wireless activation of the drive 000310 26 (approx. 30 m range in the building). 000311 26 000312 26 Transmitter: 000313 26 ( ) Wireless transmitter with 1 key, IP rating 000314 26 IP 54 and wall fixing 000315 26 ( ) Wireless transmitter with 2 keys, IP rating 000316 26 IP 54 and wall fixing 000317 26 ( ) Wireless transmitter with 4 keys, IP rating 000318 26 IP 54 and wall fixing 000319 26 ( ) Transmitting module for optional integration in 000320 26 GEZE elbow switches 000321 26 000322 26 Receiver: 000323 26 ( ) Receiving module with 2 outputs, 24 V, pulse 000324 26 mode or pulse and permanent mode for 000325 26 installation in the drive or in a flush-mounted 000326 26 box with IP rating IP 20 000327 2117 NNN 00000000000Stk 000328 25GEZE GCER 300, 1-door SET 000329 26 000330 26 Activation (optional position) 000331 26 000332 26 GEZE GCER 300, 1-door SET 000333 26 000334 26 Access control solution with RFID reader and PIN 000335 26 keypad in stand-alone operation for controlling one 000336 26 door (can be extended to 2 doors). RFID frequency 000337 26 13.56 MHz. Authorisation is granted through master 000338 26 ID cards in combination with PIN keyboard directly at 000339 26 the reader. Up to 200 persons/ID cards can be 000340 26 authorised. 000341 26 If individual ID cards are lost or become faulty, 000342 26 they can simply be deleted from the system (selective 000343 26 deletion). Two authorisation types for short-time 000344 26 release or continuous release (office function). 000345 26 Configurable door release time. Variable PIN length. 000346 26 Communication between reader and control unit takes 000347 26 place by encrypted data transfer. Functions such as 000348 26 interlocking door system or dementia adjustable. 000349 26 Release buttons can be connected. 000350 26 000351 26 Set comprising: 000352 26 1 pc. GEZE GCER 300 I/O Box (ID no. 185707) 000353 26 1 pc. GEZE GCVR 300 T, RFID reader flush-mounted 000354 26 (ID no. 185708) 000355 26 2 pc. GEZE GCER 300 system card master 000356 26 (ID no. 185713) 000357 26 10 pc. GEZE RFID ID card (ID no. 185711) 000358 26 000359 26 Optional 000360 26 GEZE GCVR Touch 300 T, RFID reader flush-mounted 000361 26 (ID no. 187108) 000362 26 GEZE RFID key fob (ID no. 185712) 000363 26 GEZE GCER AP surface-mounted frame (Id. no. 130024) 000364 26 000365 26 or 000366 26 GEZE GCER 300 Light, 1-door SET 000367 26 000368 26 Access control solution with RFID reader and PIN 000369 26 keyboard in stand-alone operation with a relay output 000370 26 for controlling one door located in the secured inner 000371 26 area. RFID frequency 13.56 MHz. Authorisation is 000372 26 granted through master ID cards in combination with 000373 26 PIN keyboard directly at the reader. Up to 200 000374 26 persons/ID cards can be authorised for short-time 000375 26 release. If individual ID cards are lost or become 000376 26 faulty, they can simply be deleted from the system 000377 26 (selective deletion). Configurable door release time. 000378 26 Variable PIN length. Communication takes place via 000379 26 encrypted data transfer. 000380 26 000381 26 Set comprising: 000382 26 1 pc. GEZE GCER 300 Light, RFID reader flush-mounted 000383 26 (ID no. 185710) 000384 26 1 pc. GEZE GCER 300 system card master 000385 26 (ID no. 185713) 000386 26 10 pc. GEZE RFID ID card (ID no. 185711) 000387 26 000388 26 Optional 000389 26 GEZE RFID key fob (ID no. 185712) 000390 26 GEZE GCER AP surface-mounted frame (ID no. 130024) 000391 26 000392 26 Accessories for GCER 300 / GCER 300 Light 000393 26 Plug-in power supply NT 1.0 A - 24 V DC (optional) 000394 26 Primary: 230 V AC, 50 Hz 000395 26 Secondary: 24 V DC (+/- 5 %) / 1 A 000396 26 (ID no. 130025) 000397 26 000398 26 Power supply NT 1.1 A - 24 V DC flush-mounted 000399 26 (optional) 000400 26 For installation in deep standard flush-mounted boxes 000401 26 Primary: 230 V AC, 50 Hz 000402 26 Secondary: 24 V DC / 1.1 A 000403 26 (ID no. 151426) 000404 26 000405 26 Power supply NT 1.5 A - 24 V DC HA (optional) 000406 26 For installation on top hat rails 000407 26 Primary: 230 V AC, 50 Hz 000408 26 Secondary: 21.6 - 26.4 V DC / 1.5 A 000409 26 (ID no. 151425) 000410 26 000411 2118 NNN 00000000000Stk 000412 25Key switch with switch function 000413 26 000414 26 Activation (optional position) 000415 26 000416 26 GEZE key switch outside (IP rating IP 54) with or 000417 26 without profile half cylinder and switch function 000418 26 ( ) Surface-mounted ( ) Flush-mounted 000419 26 000420 26 000421 2119 NNN 00000000000Stk 000422 25Key switch with hold-open function 000423 26 000424 26 Activation (optional position) 000425 26 000426 26 GEZE key switch outside (IP rating IP 54) with or 000427 26 without profile half cylinder and hold-open function 000428 26 for the fire service 000429 26 ( ) Flush-mounted 000430 2120 NNN 00000000000Stk 000431 25Key switch outside 000432 26 000433 26 Activation (optional position) 000434 26 000435 26 GEZE key switch outside (IP rating IP 54), 000436 26 prepared for on site profile half cylinder of closing 000437 26 system and 1 push button switch with key symbol for 000438 26 opening from the inside. On contact, the system opens 000439 26 from its locked position once outwards and inwards, 000440 26 and locks again after the leaf has reached the closed 000441 26 position. 000442 2121 NNN 00000000000Stk 000443 25Emergency stop switch with glass pane 000444 26 000445 26 Safeguarding (optional position) 000446 26 000447 26 GEZE emergency stop switch with glass pane and 000448 26 lighting for switching off the mains voltage, IP 000449 26 rating IP 20 000450 26 000451 26 An emergency command device (emergency stop switch) is 000452 26 not essential in accordance with DIN 18650 / EN 16005. 000453 26 000454 26 ( ) Surface-mounted ( ) Flush-mounted 000455 26 000456 26 000457 2122 NNN 00000000000Stk 000458 25Emergency stop switch with illuminated mushroom 000459 25button 000460 26 000461 26 Safeguarding (optional position) 000462 26 000463 26 GEZE emergency stop switch with illuminated mushroom 000464 26 button for emergency opening or emergency unlocking, 000465 26 IP rating IP 40 000466 26 000467 26 An emergency command device (emergency stop switch) is 000468 26 not essential in accordance with DIN 18650 / EN 16005. 000469 26 000470 26 ( ) Surface-mounted ( ) Flush-mounted 000471 26 000472 2123 NNN 00000000000Stk 000473 25Lighting (optional position) 000474 25 000475 26 000476 26 ( ) ..... pcs. LED spotlight (max. 1 W per light) 000477 26 integrated in the soffit 000478 26 000479 26 or 000480 26 ( ) ..... pcs. recess for lighting to be installed on 000481 26 site (diameter = ..... mm) 000482 26 000483 2124 NNN 00000000000Stk 000484 25Locking (optional position) 000485 26 000486 26 ( ) Electromagnetic locking, integrated in the drive 000487 26 unit, with manual emergency unlocking (standard 000488 26 only in the external door) 000489 26 000490 26 and in addition 000491 26 ( ) Bolt lock for fine-framed door leaves for 000492 26 installation in the bottom door shoe profile, 000493 26 prepared for profile cylinder and/or profile half 000494 26 cylinder, lockable on one side 000495 26 (profile half cylinder 46 mm long) 000496 26 000497 2125 NNN 00000000000Stk 000498 25Hot-air curtain system (optional position) 000499 26 000500 26 ( ) Hot-air curtain system integrated in the 000501 26 suspended ceiling construction of the round arch 000502 26 sliding door. 000503 26 000504 26 ( ) Blow-out channel in the canopy area (minimum 000505 26 canopy height 350 mm) 000506 26 000507 26 or 000508 26 ( ) Blow-out channel in the suspended soffit (canopy 000509 26 height 70 mm) 000510 26 000511 26 Hot-air curtain system design with: 000512 26 ( ) Electric connection: 000513 26 Heat output: ............kW/ Amount of 000514 26 air.........mü/h 000515 26 ( ) Hot water connection 000516 26 Heat output: ............kW/ Amount of 000517 26 air.........mü/h 000518 26 000519 26 Note: The power of the hot-air curtain equipment 000520 26 included in the offer has not been calculated by us; 000521 26 the dimensioning and specification of the hot-air 000522 26 curtains must be carried out by the specialist planner 000523 26 responsible. 000524 2126 NNN 00000000000Stk 000525 25Fa‡ade connection (optional position) 000526 26 000527 26 Off-centre fa‡ade connection 000528 26 000529 26 ( ) Connections and installation of the round arch 000530 26 sliding door off-centre to the fa‡ade 000531 26 000532 26 and/or 000533 26 ( ) Larger side parts which turn the arch into an 000534 26 oval system. Details and dimensions on request! 000535 26 000536 2127 NNN 00000000000Stk 000537 25Service maintenance - compact package 000538 26 000539 26 Maintenance and testing (option) 000540 26 000541 26 Service package for maintenance and inspection in 000542 26 accordance with EN 16005, DIN 18650 Part 2 and ASR 000543 26 A1.7 as well as according to manufacturer's 000544 26 specification with the following performance features: 000545 26 000546 26 - One maintenance per contract year 000547 26 - Free provision and updating of the test documents 000548 26 - Attachment of the inspection sticker 000549 26 - Fault diagnosis and repair jobs during the contract 000550 26 period will be carried out at reduced hourly rates 000551 26 - Service technicians will be deployed within 24 hours 000552 26 of the message being received from Monday - Friday 000553 26 between 7 am and 5 pm without surcharges 000554 26 - Personal availability at the help desk 24 hours a 000555 26 day, 365 days a year 000556 26 - Contract run time: 2 years 000557 26 000558 26 e.g. GEZE compact service package 000559 2128 NNN 00000000000Stk 000560 25Service maintenance - comfort package 000561 26 000562 26 Service maintenance (optional position) 000563 26 000564 26 Comfort service package for maintenance in accordance 000565 26 with EN 16005, DIN 18650 Part 2 and ASR A1.7 as well 000566 26 as according to manufacturer's specification with the 000567 26 following performance features: 000568 26 000569 26 - Extension of the warranty to 36 months (condition: 000570 26 the maintenance contract is concluded 3 months after 000571 26 the commissioning date at the latest) 000572 26 - One maintenance per contract year 000573 26 - Free provision and updating of the test documents 000574 26 - Attachment of the inspection sticker 000575 26 - No separate charging for services and travel costs 000576 26 during the warranty period 000577 26 - No separate charging for consumables up to EUR 25 000578 26 per maintenance 000579 26 - No separate charging for working hours when spare 000580 26 parts are replaced during the maintenance 000581 26 - Personal availability at the help desk 24 hours a 000582 26 day, 365 days a year 000583 26 - Contract run time: 3 years 000584 2129 NNN 00000000000Stk 000585 25Service maintenance - exclusive package 000586 26 000587 26 Service maintenance (optional position) 000588 26 000589 26 Exclusive service package for servicing, maintenance 000590 26 in accordance with DIN 18650 Part 2 and ASR A1.7 as 000591 26 well as according to manufacturer's specification with 000592 26 the following performance features: 000593 26 000594 26 - Extension of the warranty to 60 months (condition: 000595 26 the maintenance contract is concluded 3 months after 000596 26 the commissioning date at the latest) 000597 26 - One maintenance per contract year 000598 26 - Free provision and updating of the test documents 000599 26 - Attachment of the inspection sticker 000600 26 - Complete repair: no separate charging for repairs 000601 26 (parts and working hours) and travel costs during 000602 26 the contract run time 000603 26 - Online access for the client to the project and 000604 26 system data at the contractor's 000605 26 - Personal availability at the help desk 24 hours a 000606 26 day, 365 days a year 000607 26 - Contract run time: 5 years 000608 99 1900 00020000609