00 81L PI000000090 000001 01 27.09.21 000002 02 000003 03... 000004 08EUR Euro 000005 2110 NNN 00000000000Stk 000006 25GEZE Slimdrive SL RC 2 000007 26 000008 26 Modular, compact automatic linear sliding door with 000009 26 only 70 mm drive height, RC 2 tested in accordance 000010 26 with DIN V ENV 1627 to 1630, TšV type-tested in 000011 26 accordance with DIN 18650, for leaf weights up to 000012 26 120 kg per leaf 000013 26 000014 26 Integrated battery for emergency opening and closing 000015 26 in the event of a power failure 000016 26 Intelligent digital control (Category 2 in accordance 000017 26 with DIN EN 954-1 and Performance Level "d" in 000018 26 accordance with DIN EN ISO 13849-1): 000019 26 - Self-learning 000020 26 - Optimum convenience thanks to automatic adaptation 000021 26 of door behaviour to traffic 000022 26 - Can be networked and integrated in building systems 000023 26 via CAN-bus 000024 26 - Independent fault detection and protocol 000025 26 - Adjustment options for all door movement parameters 000026 26 - All functions integrated in one unit, no further 000027 26 modules necessary 000028 26 Extremely quiet running direct current drive 000029 26 Robust power supply with integrated all-pole main 000030 26 switch and fuse 000031 26 Static and dynamic power limitation in compliance 000032 26 with DIN 18650, as well as static under 150 N in 000033 26 accordance with ASR A1.7 (formerly BGR 232) 000034 26 Automatic reversal when obstacles are detected 000035 26 000036 26 Drive dimensions (H x D): 70 x 189 mm 000037 26 - Reinforced roller carriage version 000038 26 - Additional mechanical protection in the upper 000039 26 horizontal area 000040 26 000041 26 Floor guide: 000042 26 - Pointwise floor guide, made of anodised aluminium 000043 26 E6/EV1, can be installed on finished floor 000044 26 - Reinforced supporting bracket near the floor guide 000045 26 as anti-leverage protection for the moving leaves 000046 26 000047 26 ( ) Mounting sub-structure for supporting angle for 000048 26 stable fixing on unfinished floor 000049 26 000050 26 Locking: 000051 26 - Bi-stable electromechanical rod locking, invisibly 000052 26 integrated in the profile system, with manual 000053 26 emergency unlocking in the drive 000054 26 000055 26 ( ) Mounting sub-structure for floor plate for the 000056 26 rod locking mechanism for stable fixing on 000057 26 unfinished floor 000058 26 000059 26 Type of installation: 000060 26 ( ) Wall installation 000061 26 or 000062 26 ( ) Installation on profile system 000063 26 000064 26 Construction dimensions (dimensions in unfinished 000065 26 state): 000066 26 Clear overall height LH:............... mm 000067 26 Clear construction width LW:............... mm 000068 26 Passage height PH:.............. mm (max. 3000 mm) 000069 26 Passage clearance PC:............. mm (double-leaf 900 000070 26 - 3000 mm) 000071 26 000072 26 Application range: 000073 26 No. of leaves 000074 26 ( ) double-leaf 000075 26 ( ) with side parts 000076 26 000077 26 Fitting: 000078 26 ( ) moving leaf with ISO or mono-safety glass 000079 26 fine-framed (up to 120 kg leaf weight): 000080 26 ( ) with ISO (safety glass P4A) <23.5 mm sealed 000081 26 on the internal and external moving leaf edge 000082 26 ( ) with VSG (safety glass P4A) <23.5 mm sealed 000083 26 on the internal and external moving leaf 000084 26 edge 000085 26 000086 26 Surface of the light alloy parts of the drive and the 000087 26 moving leaves if appropriate: 000088 26 ( ) anodised EV1 000089 26 000090 26 or 000091 26 ( ) RAL ........ 000092 26 000093 26 Wiring to be carried out on site according to the GEZE 000094 26 cable diagram by an electrical contractor. 000095 26 000096 26 Installation, commissioning and instruction of the 000097 26 operator as well as documentation handover in 000098 26 compliance with DIN 18650 through plant fitters or 000099 26 service partner. 000100 26 000101 26 In compliance with DIN 18650: 000102 26 - Safety analysis must be carried out as a basis for 000103 26 planning and execution 000104 26 - An inspection must be carried out at least 1 x year 000105 26 and after-sales service maintenance at least 1 x year 000106 26 000107 26 Note 000108 26 The burglar-resistant function RC2 is only enabled in 000109 26 "NIGHT" mode. In "NIGHT" mode the door does not 000110 26 fulfil any escape route requirements. It is necessary 000111 26 to ensure that there is nobody in the building or 000112 26 that sufficient other emergency exits are available. 000113 2111 NNN 00000000000Stk 000114 25Programme switches 000115 26 Operation 000116 26 000117 26 GEZE display programme switch in the AS 500 range for 000118 26 setting the mode of operation as well as for 000119 26 commissioning and parameterisation of the drive, with 000120 26 function keys, 2x 7-segment display, alphanumerical 000121 26 fault display, IP rating IP 40 000122 26 Operating modes: permanently open, automatic, shop 000123 26 closing, night-locking, off 000124 26 ( ) Surface-mounted ( ) Flush-mounted 000125 26 000126 26 or 000127 26 GEZE key programme switch for setting the operating 000128 26 mode, with control keys, LED dot display, coded error 000129 26 display, IP rating IP 40, suitable for switch product 000130 26 ranges with 55 x 55 mm switch insert 000131 26 Operating modes: off, permanently open, automatic, 000132 26 shop closing-time, night-locking 000133 26 ( ) Surface-mounted ( ) Flush-mounted 000134 26 000135 26 or 000136 26 GEZE mechanical programme switch for setting the 000137 26 operating mode, with rotary button, LED fault display, 000138 26 IP rating IP 40, suitable for switch programmes with 000139 26 55 x 55 mm switch insert 000140 26 Operating modes: off, permanently open, automatic, 000141 26 shop closing-time, night-locking 000142 26 ( ) Surface-mounted ( ) Flush-mounted 000143 26 000144 26 or 000145 26 GEZE mechanical programme switch for setting the 000146 26 operating mode, with key, LED fault display, IP rating 000147 26 IP 40, suitable for switch programmes with 55 x 55 mm 000148 26 switch insert 000149 26 Operating modes: off, permanently open, automatic, 000150 26 shop closing-time, night-locking 000151 26 ( ) Surface-mounted ( ) Flush-mounted 000152 26 000153 2112 NNN 00000000000Stk 000154 25Key switch 000155 26 Operation (optional position) 000156 26 000157 26 GEZE key switch to "lock" the programme switch to 000158 26 prevent unauthorised changing of the operating mode, 000159 26 IP rating IP 40 000160 26 ( ) Surface-mounted ( ) Flush-mounted 000161 26 000162 2113 NNN 00000000000Stk 000163 25Combined detector 000164 26 000165 26 Activation and protection 000166 26 000167 26 GEZE combined detector with direction-sensing radar 000168 26 movement detector for activation and 3D light curtain 000169 26 for protection of the closing section in accordance 000170 26 with DIN 18650 / EN 16005, protection rating IP 54 000171 26 ( ) Interior combined detector 000172 26 ( ) Exterior combined detector 000173 26 000174 26 Accessories: 000175 26 ( ) Exterior: weather hood to protect the sensor from 000176 26 the interference of rain 000177 26 ( ) Ceiling installation bracket 000178 26 ( ) Ceiling installation kit for integrating the light 000179 26 curtain in the ceiling 000180 2114 NNN 00000000000Stk 000181 25Active infrared light curtain 000182 26 000183 26 Protection (optional position) 000184 26 000185 26 GEZE active infrared light curtain with self-monitored 000186 26 double 3D light curtain for safeguarding the closing 000187 26 section to DIN 18650, IP rating IP 54 000188 26 ( ) outside ( ) inside 000189 26 000190 2115 NNN 00000000000Stk 000191 25Radar movement detector 000192 26 000193 26 Activation (optional position) 000194 26 000195 26 GEZE radar movement detector with direction detection 000196 26 and cross-traffic fade-out for activation to DIN 000197 26 18650, IP rating IP 54 000198 26 ( ) outside ( ) inside 000199 2116 NNN 00000000000Stk 000200 25GEZE switches and push buttons 000201 26 000202 26 Activation (optional position) 000203 26 000204 26 GEZE elbow switch, plastic, IP rating IP 30 000205 26 Dimensions: 90 x 180 x 23 mm 000206 26 ( ) white ( ) stainless steel 000207 26 ( ) optional transmitting module 000208 26 ( ) Surface-mounted ( ) Rear panel for attaching the 000209 26 elbow switch to glass (in connection with the 000210 26 transmitting module) 000211 26 000212 26 or 000213 26 GEZE elbow switch, LS990, IP rating IP 30 000214 26 Dimensions: 81 x 223 x 51 mm 000215 26 ( ) white ( ) stainless steel 000216 26 ( ) optional transmitting module 000217 26 ( ) Surface-mounted ( ) Flush-mounted 000218 26 000219 26 or 000220 26 GEZE elbow switch, stainless steel, IP rating IP 65 000221 26 Dimensions: 72 x 250 x 17 mm 000222 26 ( ) Surface-mounted 000223 26 000224 26 or 000225 26 GEZE non-contact proximity switch (radar) 000226 26 Plastic with antimicrobial surface, IP rating IP65, 000227 26 multi-colour LED feedback, adjustable acoustic 000228 26 feedback. Additional input to actively change the LED 000229 26 colour. 000230 26 Dimensions: 80 x 80 mm 000231 26 ( ) Flush mounting 12 mm deep 000232 26 ( ) Surface mounting 21 mm deep 000233 26 ( ) Variant for WC 000234 26 000235 26 or 000236 26 GEZE LED sensor push button, plastic, 000237 26 IP rating IP 69K round, diameter: 100 mm 000238 26 ( ) Flush-mounted 000239 26 ( ) Surface-mounted: mounting ring flat 4 mm 000240 26 ( ) Surface-mounted: mounting ring high 20 mm 000241 26 000242 26 or 000243 26 GEZE LED sensor push button, glass, IP rating IP 69K 000244 26 round, diameter: 100 mm 000245 26 ( ) Flush-mounted 000246 26 ( ) Surface-mounted: mounting ring flat 4 mm 000247 26 ( ) Surface-mounted: mounting ring high 20 mm 000248 26 000249 26 or 000250 26 GEZE LED sensor foot switch, glass, IP rating IP69K 000251 26 Dimensions: 100 x 100 x 3 mm 000252 26 ( ) flush-mounting 000253 26 ( ) vertically adjustable installation base for 000254 26 depths of up to 215 mm from the unfinished floor 000255 2117 NNN 00000000000Stk 000256 25Wireless programme 000257 26 000258 26 Activation (optional position) 000259 26 000260 26 GEZE wireless programme with secure rolling code 000261 26 encryption for wireless activation of the drive 000262 26 (approx. 30 m range in the building). 000263 26 000264 26 Transmitter: 000265 26 ( ) Wireless transmitter with 1 key, IP rating 000266 26 IP 54 and wall fixing 000267 26 ( ) Wireless transmitter with 2 keys, IP rating 000268 26 IP 54 and wall fixing 000269 26 ( ) Wireless transmitter with 4 keys, IP rating 000270 26 IP 54 and wall fixing 000271 26 ( ) Transmitting module for optional integration in 000272 26 GEZE elbow switches 000273 26 000274 26 Receiver: 000275 26 ( ) Receiving module with 2 outputs, 24 V, pulse 000276 26 mode or pulse and permanent mode for installation 000277 26 in the drive or in a flush-mounted box with 000278 26 IP rating IP 20 000279 2118 NNN 00000000000Stk 000280 25GEZE GCER 300, 1-door SET 000281 26 000282 26 Activation (optional position) 000283 26 000284 26 GEZE GCER 300, 1-door SET 000285 26 000286 26 Access control solution with RFID reader and PIN 000287 26 keypad in stand-alone operation for controlling one 000288 26 door (can be extended to 2 doors). RFID frequency 000289 26 13.56 MHz. Authorisation is granted through master 000290 26 ID cards in combination with PIN keyboard directly at 000291 26 the reader. Up to 200 persons/ID cards can be 000292 26 authorised. 000293 26 If individual ID cards are lost or become faulty, 000294 26 they can simply be deleted from the system (selective 000295 26 deletion). Two authorisation types for short-time 000296 26 release or continuous release (office function). 000297 26 Configurable door release time. Variable PIN length. 000298 26 Communication between reader and control unit takes 000299 26 place by encrypted data transfer. Functions such as 000300 26 interlocking door system or dementia adjustable. 000301 26 Release buttons can be connected. 000302 26 000303 26 Set comprising: 000304 26 1 pc. GEZE GCER 300 I/O Box (ID no. 185707) 000305 26 1 pc. GEZE GCVR 300 T, RFID reader flush-mounted 000306 26 (ID no. 185708) 000307 26 2 pc. GEZE GCER 300 system card master 000308 26 (ID no. 185713) 000309 26 10 pc. GEZE RFID ID card (ID no. 185711) 000310 26 000311 26 Optional 000312 26 GEZE GCVR Touch 300 T, RFID reader flush-mounted 000313 26 (ID no. 187108) 000314 26 GEZE RFID key fob (ID no. 185712) 000315 26 GEZE GCER AP surface-mounted frame (Id. no. 130024) 000316 26 000317 26 or 000318 26 GEZE GCER 300 Light, 1-door SET 000319 26 000320 26 Access control solution with RFID reader and PIN 000321 26 keyboard in stand-alone operation with a relay output 000322 26 for controlling one door located in the secured inner 000323 26 area. RFID frequency 13.56 MHz. Authorisation is 000324 26 granted through master ID cards in combination with 000325 26 PIN keyboard directly at the reader. Up to 200 000326 26 persons/ID cards can be authorised for short-time 000327 26 release. If individual ID cards are lost or become 000328 26 faulty, they can simply be deleted from the system 000329 26 (selective deletion). Configurable door release time. 000330 26 Variable PIN length. Communication takes place via 000331 26 encrypted data transfer. 000332 26 000333 26 Set comprising: 000334 26 1 pc. GEZE GCER 300 Light, RFID reader flush-mounted 000335 26 (ID no. 185710) 000336 26 1 pc. GEZE GCER 300 system card master 000337 26 (ID no. 185713) 000338 26 10 pc. GEZE RFID ID card (ID no. 185711) 000339 26 000340 26 Optional 000341 26 GEZE RFID key fob (ID no. 185712) 000342 26 GEZE GCER AP surface-mounted frame (ID no. 130024) 000343 26 000344 26 Accessories for GCER 300 / GCER 300 Light 000345 26 Plug-in power supply NT 1.0 A - 24 V DC (optional) 000346 26 Primary: 230 V AC, 50 Hz 000347 26 Secondary: 24 V DC (+/- 5 %) / 1 A 000348 26 (ID no. 130025) 000349 26 000350 26 Power supply NT 1.1 A - 24 V DC flush-mounted 000351 26 (optional) 000352 26 For installation in deep standard flush-mounted boxes 000353 26 Primary: 230 V AC, 50 Hz 000354 26 Secondary: 24 V DC / 1.1 A 000355 26 (ID no. 151426) 000356 26 000357 26 Power supply NT 1.5 A - 24 V DC HA (optional) 000358 26 For installation on top hat rails 000359 26 Primary: 230 V AC, 50 Hz 000360 26 Secondary: 21.6 - 26.4 V DC / 1.5 A 000361 26 (ID no. 151425) 000362 26 000363 2119 NNN 00000000000Stk 000364 25Key switch with switch function 000365 26 000366 26 Activation (optional position) 000367 26 000368 26 GEZE key switch outside (IP rating IP 54) with or 000369 26 without profile half cylinder and switch function 000370 26 ( ) Surface-mounted ( ) Flush-mounted 000371 2120 NNN 00000000000Stk 000372 25Key switch with hold-open function 000373 26 000374 26 Activation (optional position) 000375 26 000376 26 GEZE key switch outside (IP rating IP 54) with or 000377 26 without profile half cylinder and hold-open function 000378 26 for the fire service 000379 26 ( ) Flush-mounted 000380 2121 NNN 00000000000Stk 000381 25Key push button outside 000382 26 000383 26 Activation (optional position) 000384 26 000385 26 GEZE key switch outside (IP rating IP 54), 000386 26 prepared for on site profile half cylinder of closing 000387 26 system and 1 push button switch with key symbol for 000388 26 opening from the inside. On contact, the system opens 000389 26 from its locked position once outwards and inwards, 000390 26 and locks again after the leaf has reached the closed 000391 26 position. 000392 2122 NNN 00000000000Stk 000393 25Additional pushbutton 000394 26 000395 26 Activation (optional position) 000396 26 000397 26 GEZE additional pushbutton for limited opening width 000398 2123 NNN 00000000000Stk 000399 25Safety leaf 000400 26 000401 26 Safeguarding 000402 26 000403 26 GEZE safety leaf for protecting against shearing and 000404 26 nipping spots in accordance with DIN 18650 with 000405 26 post-rail structures (depending on the offset between 000406 26 post surface and facade glassing) behind the moving 000407 26 leaf, leaf made of 10 mm ESG incl. fitting 000408 26 000409 26 alternatively: 000410 26 ( ) sensor-controlled side panel protection using 3D 000411 26 light curtain 000412 26 000413 2124 NNN 00000000000Stk 000414 25Safety photoelectric barrier 000415 26 000416 26 Protection (optional position) 000417 26 000418 26 GEZE safety photoelectric barrier with 2 transmitters 000419 26 and 2 radio receivers for protecting the opening 000420 26 width, IP rating IP 65 (according to DIN 18650 only 000421 26 permissible if a radar movement detector is used on 000422 26 both sides, door leaf power is limited by a power 000423 26 limitation system and not for people in need of 000424 26 special protection) 000425 26 000426 2125 NNN 00000000000Stk 000427 25Emergency stop switch with glass pane 000428 26 000429 26 Protection (optional position) 000430 26 000431 26 GEZE emergency stop switch with glass pane and 000432 26 lighting for switching off the mains voltage, IP 000433 26 rating IP 20 000434 26 000435 26 An emergency command device (emergency stop switch) is 000436 26 not essential in accordance with DIN 18650. 000437 26 000438 26 ( ) Surface-mounted ( ) Flush-mounted 000439 26 000440 2126 NNN 00000000000Stk 000441 25Emergency stop switch with illuminated mushroom 000442 25button 000443 26 000444 26 Protection (optional position) 000445 26 000446 26 GEZE emergency stop switch with illuminated mushroom 000447 26 button for emergency opening or emergency unlocking, 000448 26 IP rating IP 40 000449 26 000450 26 An emergency command device (emergency stop switch) is 000451 26 not essential in accordance with DIN 18650. 000452 26 000453 26 ( ) Surface-mounted ( ) Flush-mounted 000454 26 000455 2127 NNN 00000000000Stk 000456 25Service maintenance - compact package 000457 26 000458 26 Maintenance and testing (option) 000459 26 000460 26 Service package for maintenance and inspection in 000461 26 accordance with EN 16005, DIN 18650 Part 2 and ASR 000462 26 A1.7 as well as according to manufacturer's 000463 26 specification with the following performance features: 000464 26 000465 26 - One maintenance per contract year 000466 26 - Free provision and updating of the test documents 000467 26 - Attachment of the inspection sticker 000468 26 - Fault diagnosis and repair jobs during the contract 000469 26 period will be carried out at reduced hourly rates 000470 26 - Service technicians will be deployed within 24 hours 000471 26 of the message being received from Monday - Friday 000472 26 between 7 am and 5 pm without surcharges 000473 26 - Personal availability at the help desk 24 hours a 000474 26 day, 365 days a year 000475 26 - Contract run time: 2 years 000476 26 000477 26 e.g. GEZE compact service package 000478 2128 NNN 00000000000Stk 000479 25Service maintenance - comfort package 000480 26 000481 26 Service maintenance (optional position) 000482 26 000483 26 Comfort service package for maintenance in accordance 000484 26 with EN 16005, DIN 18650 Part 2 and ASR A1.7 as well 000485 26 as according to manufacturer's specification with the 000486 26 following performance features: 000487 26 000488 26 - Extension of the warranty to 36 months (condition: 000489 26 the maintenance contract is concluded 3 months after 000490 26 the commissioning date at the latest) 000491 26 - One maintenance per contract year 000492 26 - Free provision and updating of the test documents 000493 26 - Attachment of the inspection sticker 000494 26 - No separate charging for services and travel costs 000495 26 during the warranty period 000496 26 - No separate charging for consumables up to EUR 25 000497 26 per maintenance 000498 26 - No separate charging for working hours when spare 000499 26 parts are replaced during the maintenance 000500 26 - Personal availability at the help desk 24 hours a 000501 26 day, 365 days a year 000502 26 - Contract run time: 3 years 000503 2129 NNN 00000000000Stk 000504 25Service maintenance - exclusive package 000505 26 000506 26 Service maintenance (optional position) 000507 26 000508 26 Exclusive service package for servicing, maintenance 000509 26 in accordance with DIN 18650 Part 2 and ASR A1.7 as 000510 26 well as according to manufacturer's specification with 000511 26 the following performance features: 000512 26 000513 26 - Extension of the warranty to 60 months (condition: 000514 26 the maintenance contract is concluded 3 months after 000515 26 the commissioning date at the latest) 000516 26 - One maintenance per contract year 000517 26 - Free provision and updating of the test documents 000518 26 - Attachment of the inspection sticker 000519 26 - Complete repair: no separate charging for repairs 000520 26 (parts and working hours) and travel costs during 000521 26 the contract run time 000522 26 - Online access for the client to the project and 000523 26 system data at the contractor's 000524 26 - Personal availability at the help desk 24 hours a 000525 26 day, 365 days a year 000526 26 - Contract run time: 5 years 000527 99 1900 00020000528