Search filter

265 results found

Declaration of performance for electric hold-open magnet No.0086-CP
Declarations of performance

Declaration of performance for electric hold-open magnet No.0086-CP

DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0086-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R153.01 GTR050.750011 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … .7 3/4 No.0086-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0086-CPR

PDF | 300 KB
Declaration of performance for electric hold-open magnet No. 0040-CPR
Declarations of performance

Declaration of performance for electric hold-open magnet No. 0040-CPR

DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0040-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R020.01 GTR050.500102 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … .7 3/4 No.0040-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0040-CPR

PDF | 300 KB
Declaration of performance for electric hold-open magnet No. 0072-CPR
Declarations of performance

Declaration of performance for electric hold-open magnet No. 0072-CPR

DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0072-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R089.01 GTR050.588011 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … .7 3/4 No.0072-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0072-CPR

PDF | 300 KB
Declaration of performance for the product Electric hold-open magnet No. 0024-CPR
Declarations of performance

Declaration of performance for the product Electric hold-open magnet No. 0024-CPR

DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0024-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R001.01 GTR050.007007 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … .7 3/4 No.0024-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0024-CPR

PDF | 300 KB
DECLARATION OF PERFORMANCE electrical hold-open magnet no.0138-CPR
Declarations of performance

DECLARATION OF PERFORMANCE electrical hold-open magnet no.0138-CPR

DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0138-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GTR048000A08 GTR0480109 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20435 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … .7 3/6 No.0138-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 27/01/2014 4/6 No.0138-CPR FÖRKLARING AV PRESTANDA Enligt bilaga III till förordning ( EU ) No.305/2011 Byggproduktförordningen för produkt dörrhållarmagnet No.0138-CPR 1. Typbeteckning: 2. Typidentifierings nr.: 3. Avsedd användning: 4. Tillverkare: 5. System för bedömning av prestanda hos byggprodukten: 6. Harmoniserad standard: 7. I de fall prestandadeklarationen berör en byggprodukt, som omfattas i en harmoniserad standard: GTR048000A08 GTR0480109 Dörrhållarmagnet som tillsammans med en ankarplatta elektriskt håller slagdörrar öppna. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Tyskland System

PDF | 317 KB
Declaration of performance (DoP): GEZE MBZ 300 SHEV control panel
Declarations of performance

Declaration of performance (DoP): GEZE MBZ 300 SHEV control panel

Declaration of Performance (DoP): GEZE MBZ 300 EN ID for Declaration of Performance GEZE MBZ 300_0786-CPD-50162 1. Type of product RWA emergency power control unit 2. Identity numbers 137428, 137430, 137461, 137463, 137462, 137453, 187322, 188034 3. Intended use For use in smoke and heat extraction systems 4. Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Authorised person ---- 6. Assessment of constancy of performance … . ID certificate 0786-CPD-50162 9. Declared performance Relevant characteristics determined Operational safety “Operational safety” requirements met - EN 12101-10:2005/AC:2007 sections … , and 12 Performance parameters under the effect of fire “Performance parameters under the effect of fire” requirements met - EN 12101-10:2005/AC:sections … .2 10. Product performance The performance of the product according to No. … conforms to the declared performance according to No. 9. The manufacturer under No. … is solely responsible for preparing the declaration of performance according to No. 9. Place, date Leonberg, … .2020 Gerald Haas, Managing Director Déclaration des performances (DoP): GEZE MBZ 300 FR Identification Déclaration des performances GEZE MBZ 300_0786-CPD-50162 1. Type de produit Centrale de commande de secours RWA 2. Numéros d'identification 137428, 137430, 137461, 137463, 137462, 137453, 187322, 188034 3. Usage prévu Pour une utilisation dans les installations d’extraction de fumée et de chaleur 4. Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Mandataire ---- 6. Système pour l'évaluation des performances … . Certificat ID 0786-CPD-50162 9. Performances déclarées Principales caractéristiques constatées Sécurité de fonctionnement Exigences « Sécurité de fonctionnement » remplies - EN 12101-10:2005/AC:2007 sections … , et 12 Paramètres de performance sous l’effet d'un incendie Exigences « Paramètres de performance sous l’effet d’un incendie » remplies - EN 12101-10:2005/AC:2007 sections … .2 10. Performances du produit La performance du produit désignée sous n° … correspond à la performance déclarée sous n° 9. Le seul et unique responsable de l'établissement de la déclaration de performance selon n° … corespunde performanței declarate conform nr. 9. Responsabil pentru întocmirea declarației de performanță conform nr.

PDF | 722 KB
Declaration of performance (DoP) GEZE E 260 N
Declarations of performance

Declaration of performance (DoP) GEZE E 260 N

Declaration of Performance (DoP): GEZE E 260 N EN ID for Declaration of Performance GEZE E 260 N_0786-CPD-50501, 0786-CPD-50502 1. Type of product RWA emergency power control unit 2. Identity numbers 119629, 119630, 119631, 119632, 110500, 100612, 100613, 100614, 100615, 100616, 100617, 100618, 100619 3. Intended use For use in smoke and heat extraction systems 4. Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Authorised signatory --- 6. System for evaluating performance reliability … . ID certificate 0786-CPD-50501, 0786-CPD-50502 9. Declared performance Essential characteristics determined Operational safety “Operational safety” requirements met - EN 12101-10:2005/AC:2007 sections … , and 12 Performance parameters under the effect of fire “Performance parameters under the effect of fire” requirements met - EN 12101-10:2005/AC:sections … .2 10. Product performance The performance of the product specified under No. … corresponds to the declared performance according to No. 9. The manufacturer under No. … is solely responsible for preparing the declaration of performance according to No. 9. Place, date Leonberg, … .2017 Marc Alber, toimitusjohtaja FI Déclaration des performances (DoP): E 260 N GEZE FR Identification Déclaration des performances E 260 N GEZE_0786-CPD-50501, 0786-CPD-50502 1. Type de produit Centrale de commande de secours RWA 2. Numéros d'identification 119629, 119630, 119631, 119632, 110500, 100612, 100613, 100614, 100615, 100616, 100617, 100618, 100619 3. Usage prévu Pour une utilisation dans les installations d’extraction de fumée et de chaleur 4. Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Mandataire --- 6. Système d'évaluation de la constance des performances … . Certificat ID 0786-CPD-50501, 0786-CPD-50502 9. Performances déclarées Principales caractéristiques constatées Sécurité de fonctionnement Exigences « Sécurité de fonctionnement » remplies - EN 12101-10:2005/AC:2007 sections … , et 12 Paramètres de performance sous l’effet d'un incendie Exigences « Paramètres de performance sous l’effet d’un incendie » remplies - EN 12101-10:2005/AC:2007 sections … .2 10. Performances du produit Les performances du produit indiqué au n° … correspondent aux performances déclarées au n° 9. Le fabricant identifié au n°4 est seul responsable de l'établissement de la déclaration des performances selon le n° 9. Lieu, date Leonberg, … corespunde performanţei declarate conform nr. 9. Responsabil pentru întocmirea declaraţiei de performanţă conform nr.

PDF | 233 KB
Declaration of performance (DoP): GEZE THZ / THZ Comfort smoke and heat extraction system SHEV control panel
Declarations of performance

Declaration of performance (DoP): GEZE THZ / THZ Comfort smoke and heat extraction system SHEV control panel

Declaration of Performance (DoP): GEZE THZ/THZ Comfort EN ID for Declaration of Performance GEZE THZ/THZ Comfort_0786-CPR-0647, 0786-CPD-50615 1. Type of product RWA emergency power control unit 2. Identity numbers 139151, 140906, 140903, 140900, 140901, 140902, 140904, 140905 3. Intended use For use in smoke and heat extraction systems 4. Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Authorised signatory --- 6. System for evaluating performance reliability … . ID certificate 0786-CPR-0647, 0786-CPD-50615 9. Declared performance Essential characteristics determined Operational safety “Operational safety” requirements met - EN 12101-10:2005/AC:2007 sections … , and 12 Performance parameters under the effect of fire “Performance parameters under the effect of fire” requirements met - EN 12101-10:2005/AC:sections … .2 10. Product performance The performance of the product specified under No. … corresponds to the declared performance according to No. 9. The manufacturer under No. … is solely responsible for preparing the declaration of performance according to No. 9. Place, date Leonberg, … .2017 Marc Alber, toimitusjohtaja FI Déclaration des performances (DoP): GEZE THZ/THZ Comfort FR Identification Déclaration des performances GEZE THZ/THZ Comfort_0786-CPR-0647, 0786-CPD-50615 1. Type de produit Centrale de commande de secours RWA 2. Numéros d'identification 139151, 140906, 140903, 140900, 140901, 140902, 140904, 140905 3. Usage prévu Pour une utilisation dans les installations d’extraction de fumée et de chaleur 4. Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Mandataire --- 6. Système d'évaluation de la constance des performances … . Certificat ID 0786-CPR-0647, 0786-CPD-50615 9. Performances déclarées Principales caractéristiques constatées Sécurité de fonctionnement Exigences « Sécurité de fonctionnement » remplies - EN 12101-10:2005/AC:2007 sections … , et 12 Paramètres de performance sous l’effet d'un incendie Exigences « Paramètres de performance sous l’effet d’un incendie » remplies - EN 12101-10:2005/AC:2007 sections … .2 10. Performances du produit Les performances du produit indiqué au n° … correspondent aux performances déclarées au n° 9. Le fabricant identifié au n°4 est seul responsable de l'établissement de la déclaration des performances selon le n° 9. Lieu, date Leonberg, … corespunde performanţei declarate conform nr. 9. Responsabil pentru întocmirea declaraţiei de performanţă conform nr.

PDF | 233 KB
Declaration of performance (DoP): GEZE Slimdrive EMD F-IS Swing door systems
Declarations of performance

Declaration of performance (DoP): GEZE Slimdrive EMD F-IS Swing door systems

Declaration of Performance (DoP): GEZE Slimdrive EMD F-IS ID for Declaration of Performance GEZE Slimdrive EMD F-IS_ 1. Type of product GEZE swing door systems 2. Identity numbers 120652, 120654, 120655, 106439, 106435, 106445, 106441, 105303, 105307, 106652, 106676, 122770 3. Intended use Swing door systems with integrated closing sequence control for double-leaf fire and smoke protection doors (F-IS) 4. Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Authorised signatory ---- 6. System for evaluating consistency of performance … . ID certificate 9. Declared performance Important characteristics determined EN 1158 - Self-closing "Self-closing" requirements fulfilled - EN 1158:1997 + A1:2002 sections … = very high) 10. Product performance The performance of the product according to No. … conforms to the declared performance according to No. 9. The manufacturer under No. … is solely responsible for preparing the declaration of performance according to No. 9. Place, date Leonberg, … .2018 Gerald Haas, toimitusjohtaja Déclaration des performances (DoP): Slimdrive EMD-F-IS GEZE FR Identification Déclaration des performances Slimdrive EMD-F-IS GEZE_ 1. Type de produit Systèmes GEZE pour portes battantes 2. Numéros d'identification 120652, 120654, 120655, 106439, 106435, 106445, 106441, 105303, 105307, 106652, 106676, 122770 3. Usage prévu Systèmes pour portes battantes avec sélecteur de fermeture intégré pour portes coupe-feu et portes pare-flammes (F-IS) à … vantaux 4. Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Mandataire ---- 6. Système pour l'évaluation des performances … . Certificat ID 9. Performances déclarées Principales caractéristiques constatées EN 1158 - fermeture automatique Exigences « fermeture automatique » remplies - EN 1158:1997 + A1:2002 paragraphes … = très élevée) 10. Performances du produit La performance du produit désignée sous n° … correspond à la performance déclarée sous n° 9. Le seul et unique responsable de l'établissement de la déclaration de performance selon n° … corespunde performan#ei declarate conform nr. 9. Responsabil pentru întocmirea declara#iei de performan#ă conform nr.

PDF | 273 KB
Declaration of performance GEZE TS 3000 Door closer system
Declarations of performance

Declaration of performance GEZE TS 3000 Door closer system

Declaration of Performance (DoP): GEZE TS 3000 B ID for Declaration of Performance GEZE TS 3000 B_0672-CPR-0147 1. Type of product Door closer system 2. Identity numbers 117816 3. Intended use Door closer with controlled closing procedure for use on fire and/or smoke protection doors or on emergency exits 4. Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Authorised person ---- 6. Assessment of constancy of performance … . ID certificate 0672-CPR-0147 9. Declared performance Relevant characteristics determined EN 1154 - Self-closing "Self-closing" requirements fulfilled - EN 1154:1996/A1:2002/AC:2006 sections … = very high) 10. Product performance The performance of the product according to No. … conforms to the declared performance according to No. 9. The manufacturer under No. … is solely responsible for preparing the declaration of performance according to No. 9. Place, date Leonberg, … .2019 Gerald Haas, toimitusjohtaja Déclaration des performances (DoP): GEZE TS 3000 B FR Identification Déclaration des performances GEZE TS 3000 B_0672-CPR-0147 1. Type de produit Système de ferme-porte 2. Numéros d'identification 117816 3. Usage prévu Dispositif ferme-porte avec séquence de fermeture contrôlée pour les portes coupe-feu et/ou pare-flammes ou pour les issues de secours 4. Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, D-71229 Leonberg 5. Mandataire ---- 6. Système pour l'évaluation des performances … . Certificat ID 0672-CPR-0147 9. Performances déclarées Principales caractéristiques constatées EN 1154 - fermeture automatique Exigences « fermeture automatique » remplies - EN 1154:1996/A1:2002/AC:2006 paragraphes … = très élevée) 10. Performances du produit La performance du produit désignée sous n° … correspond à la performance déclarée sous n° 9. Le seul et unique responsable de l'établissement de la déclaration de performance selon n° … corespunde performan#ei declarate conform nr. 9. Responsabil pentru întocmirea declara#iei de performan#ă conform nr.

PDF | 740 KB